What is the Brush Cleaner & Softener and what is it used for? (Brush Saver) Our Brush Cleaner & Softener gently cleans and removes unwanted discolo...

Our primer is particularly suitable for oily & damp nails and ensures optimal adhesion. It draws moisture from the nail and removes greasy residue so th...

If the surface of your manicure has become matt, you do not have to remove all the layers again. It is perfectly sufficient to lightly file off the top coat...

To prevent the neck of the bottle from sticking, make sure you always brush the brush in the same place on the neck of the bottle and remove any residue fro...

Each liquid can be used for approx. 20 applications. This can of course vary depending on consumption and the number of coats.

Our bottles have a volume of 17.5ml and are filled with 15.2ml. That's why they are never full to the brim. The Activator and Brush Saver are as fluid ...

Our liquids are based on cyanoacrylate. Cyanoacrylate is often used in medicine to seal wounds or in eyelash adhesives. Superglue is also based on this subs...

Your top coat needs the Activator to cure properly. It is therefore very important to always apply enough Activator before sealing your design with the top ...

The Activator is indispensable in our dipping system: on the one hand, it hardens the individual dipping layers and allows you to then touch up any unevenn...

The top coat brush can harden if it comes into contact with the Activator. You can prevent this from happening in future: Always observe the drying time...